Furnace | Air Conditioners | Water Heater
About Us | Comfort Protection Plan | Products | Home | FAQ | Free Estimate | Contact Us
Furnace
Air Conditioners
Water Heater
  • goensaving.com
  • goensaving.com
  • goensaving.com
  • goensaving.com
 
 

New Government Rebate in Ontario

You can receive up to $650 incentive when you participate in the Heating & cooling Incentive program.

Read more...

 

Read more...
 

We have the newest Government Rebate Information, which is very useful for every household. We are a fast growth home comfort company which is focus on Toronto and GTA region.  We are specializing in the installation and service of heating, cooling and ventilation system with our own licensed, insured and bonded expert teams. Family With high moral and ethical values, Highly trained specialist, Ongoing training to assure your complete satisfaction, Service technicians are licensed and insured, Customer service department available to serve your individual needs. ProtectionWe specialize in residential & commercial comfort systems, we protect your home before, during, and after installation. Work site cleaned to customer satisfaction before completion. We are fully licensed and insured for your protection.

 
 
 
 

Furnace Print E-mail
Tuesday, 13 December 2011 19:45

 

Q. How do I determine which filter to buy for my particular model of furnace?

Q. How often do I need to change my furnace filter?

Q. What is the purpose of a furnace filter?

Q. When should I replace my furnace?

Q. What are some tips for maintaining the furnace?

Q. What is the most important item in replacing a furnace?

Q. What energy efficiency rating do I look for in a furnace?

Q. What are some recent improvements in furnaces?

Q. How do I determine which filter to buy for my particular model of furnace?

A. There are several sources of information you can check: the documentation that came with your furnace; the HVAC contractor that installed or services your furnace; your furnace manufacturer; or a furnace filter vendor
Back to top To Top
Q. How often do I need to change my furnace filter?

A. Check the documentation that came with your furnace. Recommendations vary based on a number of factors: the type of filter that you use, how many pets you have, whether anyone in your home has allergies, etc. If you use disposable fiberglass panel or electrostatic panel filters, you should change them anywhere from once a month to once every three months. Pleated filters generally last from 3 months to a year.
Back to top To Top
Q. What is the purpose of a furnace filter?

A. Furnace manufacturers put inexpensive fiberglass filters into their furnaces to remove airborne particles that might damage the fan and the heating coil. Particle buildup can also decrease the efficiency of your furnace, as the furnace has to work harder to pull air through the intake. More expensive filters can also improve the air quality in your house by removing pollen, bacteria and mold spores from the air. This is especially important if you or someone in your family suffers from allergies.
Back to top To Top
Q. When should I replace my furnace?

You have two choices - you can replace your furnace before it breaks down, or wait till after it breaks down. If you replace it before it breaks down, you can take time to shop for the best deal, and install it on your own timetable. If you wait till after its breaks down (probably on the coldest day in the winter) you are usually in an emergency situation and need to replace it immediately. You may not be able to get the best deal and may have to settle for the first furnace you can get. Therefore, you may want to consider replacing your old furnace before it breaks down.

The average 80% standard oil or gas furnace lasts 18 years. Most high efficiency 90%+ furnaces only last 12 years due to their longer run times and design characteristics. It makes sense to have your furnace checked by an HVAC professional every few years. This is especially true for older units. Once you get past the life expectancy of the unit consider planning for a replacement unit.

These symptoms can indicate a furnace should be replaced


* Frequent pilot light outages
* Delayed ignition
* Yellow flame or wavering flame
* Excessive soot or corrosion
* Too much or too little heat
* The smell of sulfur or burnt eggs
Back to top To Top
Q. What are some tips for maintaining the furnace?

Your forced-air heating system can perform more efficiently if you...

I* nspect filters once a month and replace as needed during heating season
* Inspect fan belts for cracks
* Make sure vents and air return vents are clear of obstruction
* Check chimney and venting systems once a year for secure fittings, leaks, and no corrosion or damage
* Keep area around furnace clean and clutter-free
* Do not block the source of furnace combustion air by enclosing furnace is a small closet or by making the room it is located in too air tight
Back to top To Top
Q. What is the most important item in replacing a furnace?

Proper sizing is the most important thing in replacing a furnace. Bigger isn't better. Smaller isn't cheaper. The best comfort and efficiency is through a properly sized furnace. If the furnace is too small it won't keep the house at the desired temperature when it is cold outside. If the furnace is too big it heats the house too quickly and than shuts off. This results in hot and cold swings in temperature in the house.

To properly determine the correct size for a furnace, the dealer should do a heat loss calculation. This is sometimes called a Manual J calculation. If the dealers will not do this calculation, you may want to consider a different dealer for your furnace.
Back to top To Top
Q. What energy efficiency rating do I look for in a furnace?

Furnaces prior to 1990 were 55% to 65% efficient. The standard furnaces today are 80% efficient. High efficiency furnaces can be up to 97% efficient. A high efficiency furnace will generally cost more to install, but will save about 15% of the heating bill as compared to a standard unit. Have your furnace dealer show you a comparison of the differences in purchase cost and operating cost before making a purchase decision. If your furnace is more than 15 years old, a new furnace will probably be more efficient and save money.
Back to top To Top
Q. What are some recent improvements in furnaces?

There have been a number of improvements in furnace technology:

* Two stage or multi speed burners that provide more comfort and efficiency than single stage burners
* Hot surface or spark ignition - eliminates pilot light
* Electroic blower control reduces cold drafts at start up
* Electronic thermostats are more accurate then mercury bulb thermostats
* Direct drive motors for dependable air flow
* Multi-speed direct drive motors work in conjunction with multi-stage burners to improve air distribution temperature
* Zoned heating increases the comfort level and increases the energy efficiency of the house
* Direct venting through low-temperature piping allows elimination of chimney
Last Updated on Tuesday, 13 December 2011 20:42
 
 
Home | About Us | FAQ | Contact Us | Privacy policy
2011 ©GoSaving Inc..  All Rights Reserved.